|
Crown CTS 3000USP3Product code: CROCTS300U Manufacturer: Crown Price: $4,265.00 
| | 5% discount coupon: Enter AFF01 at checkout for 5% off any purchase |
|

Crown CTS 3000USP3 Crown CTS 3000USP3 Description: Crown CTs 3000 Two-Channel Power Amplifier with PIP-USP3. The Crown CTs-3000 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. This unit includes a PIP-LITE module for networked controlling via either HiQnet and System Architect or TCP/IQ and IQwic. Crown CTS 3000USP3 Features: - High-power, 2-channel, 2U rackmount amplifier for installed sound applications
- Switching power supply lowers overall amplifier weight
- Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation
- Independently selectable Input Sensitivity switching per channel
- Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements
- Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat
- Junction Temperature Simulation(JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel
- Continuously variable fan cooling; venting with front-to-rear forced airflow
- Removable balanced terminal block input connectors with "Y" switch
- Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems
- Complete array of front panel function and warning indicator LEDs for each channel
- Complete array of rear panel function and filter switches
- Power on indicator flashes when AC mains are under or over voltage
- Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.
Output Power: 2 ohm Dual (Per Channel): 1500W4 ohm Dual (Per Channel): 1500W8 ohm Dual (Per Channel): 1250W16 ohm Dual (Per Channel): 625W70V Dual (Per Channel): 1500W100V Dual (Per Channel): 1500W4 ohm Bridge: 3000W8 ohm Bridge: 3000W16 ohm Bridge: 2500W140V Bridge: 3000W200V Bridge: 3000WDamping Factor 10 Hz - 100 Hz:>3000Input Sensitivity Switchable: - 1.4V(8/4 Ohms)
- 26 dB Gain:
- 2.46V(4 Ohm Load)
- 3.47V (8 Ohm Load)
- 1.4V(70V)
- Input Impedance 10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)
- Gain 71.4:1 (37 dB)
- Frequency Response 20 Hz - 20 kHz +/-0.25 dB @ 1 Watt
- Signal-to-Noise Ratio 105 dB A-Weighted, below rated power(20 Hz - 20 kHz)
- Total Harmonic Distortion (THD) < 0.35%, at full rated power (20 Hz - 20 kHz)
- Input Connections 2 x Balanced 3-Pin Terminal Block Connectors(one per channel)
- Output Connectors 1 x 4-Pole Terminal Strip(Ch 1, Ch 2)
Controls Front Panel - 1 x Power Switch
- Controls (Rear) 1 x Reset Switch
- 1 x Rotary Channel Level Control(per channel)
- 1 x 2-Position Operation Mode Switch
- 1 x Highpass Filter Switch(per channel)
- 1 x "Y" Input Switch
- 1 x Interior 3-Position Input Sensitivity Switch(per channel)
Indicators Front Panel: - 1 x Yellow LED Bridge Mode Indicator
- 1 x Green LED Ready Indicator
- 3 x Green LED Signal Indicators(per channel)
- 1 x Red LED Clip Indicator(per channel)
- 1 x Red LED Thermal Indicator(per channel)
- 1 x Red LED Fault Indicator
- 1 x Yellow LED Data Indicator(per channel)
- 1 x Blue LED Power Indicator
- Back Panel: No Indicators on Back Panel
Crown CTS 3000USP3 Specifications: - Cooling Continuously Variable Speed Fans
- Ventilation Grille(Front),Cooling Vents(Back)
- Front-to-Rear forced airflow
- Power Consumption 35 Watts (120 VAC Mains)
- Dimensions (WxHxD) 19 x 3.5 x 14.25" (483 x 89 x 362mm)
- Weight 27.7 lb (12.6 kg)
- Specialties Variable Speed Fan Cooling
- Thermal Level Control
- JTS Limiting Circuitry
Get your Crown CTS 3000USP3 product today! 
 Brands and product names are registered trademarks of their respective companies. Prices, specifications, and availability are subject to change without notification. E.&O.E. Image &
Description provided by and used with permission from Music Unlimited (InstrumentPro.com). Page revised:
Sunday, January 4, 2009.
This page is at http://musicgear4u.com/go/crocts300u Copyright
- MusicGear4u.com |
|